This Bomb Squad Tool Kit is the JTK-73FTCP, the elite version of Jensen’s Bomb Squad kits: all hand tools and CNC routed inserts are housed in Pelican’s 1600 tool case.
Each stackable foam insert is stored in a tough ballistic nylon pouch with clear plastic top. This provides tool accountability and easy access to the entire tool load. The case exceeds the highest of all industry standards, and is widely used in all branches of the military.
The Pelican 1600 is airtight and water resistant (to 30Ft.).
Birchwood sticks
C-Clamps (2)
Chisel, cold, ½”
Chisel, wood, 1/2"
Drill bit set, 13 pc.
Hacksaw
Hammer, claw, 16 oz.
Hemostat, curved, 6”
Hemostat, straight, 6”
Hex key set, long 9 pc.
Illumination kit
Knife, electrician’s
Magnifier, 5x
Mirror, inspection, rectangle
Mirror, inspection, round
Mirror, inspection, plastic 1”
Parts box, plastic
Penlight w/batteries
Pickup tool, flexible Pliers, cutter/skinner, 5 1/2"
Pliers, diagonal cutter, 4 ½”
Pliers, long nose, 4 ¾”
Pliers, long nose w/cutter 6 ¾”
Pliers, slip joint, 6”
Pliers, locking, long nose, 6”
Pliers, locking, curved, 10”
Pliers, groove-joint, 7”
Punch pin, 1/16”
Punch pin, 1/8”
Pry bar, 13”
Scalpel
Scissors
Screwdriver, offset Phillips
Screwdriver, offset Slotted
Screwdriver, Phillips, #0 x 2”
Screwdriver, Phillips, #1 x 3”
Screwdriver, Phillips, #2 x 4”
Screwdriver, Phillips, #3 x 6”
Screwdriver, Slotted, 1/8 x 3”
Screwdriver, Slotted, 5/16 x 6”
Screwdriver, Slotted, 3/16 x 4”
Screwdriver, Slotted, 1/4 x 6”
Snips, aviation
Soldering iron
Spudger
Tape, electrical 3/4 ” x 66’
Tape filament 1” x 150’
Tape measure, steel 25”
Tweezers
Wallboard, Jab Saw
Wire crimper/stripper
Wrench, adjustable, 6”
Wrench, adjustable, 10”
Wrench, pipe, 14”
Tool case
Tool Pallets, CNC routed foam
